You're shopping
Eugene, OR
7 AM - 8 PM
Jerry’s Home Improvement Center
Red Head 50082
Trubolt® Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors. Anchors are tested to ACI 355.2 and ICC-ES AC193.
| Type | : | Wedge Anchors |
| Length | : | 3 in |
| Thread Size | : | 3/8-16 |
| Thread Length | : | 1-3/4 in |
| Maximum Work Thickness | : | 1-1/8 in |
| Minimum Embedment Depth | : | 1-3/4 in |
| Overall Length | : | 3 in |
| Material | : | Carbon Steel |
| Finish | : | Zinc |
| Shear Strength | : | 4500 lb Solid Concrete, 4000 lb Lightweight Concrete |
| Tensile Strength | : | 6120 lb Solid Concrete, 2840 lb Lightweight Concrete |
| Head Type | : | Hex Nut |
| Diameter | : | 3/8 in |
| Drill Size | : | 3/8 in |
- Versatile fully threaded design is standard on sizes up to 3/4 in Dia and 10 in L
- Anchor diameter equals hole diameter
- 360 deg contact with concrete assures full expansion for reliable working loads
- Non bottom-bearing, may be used in hole depth exceeding anchor length
- Can be installed through the work fixture, eliminating hole spotting
- Inspectable torque values, indicating proper installation
Instruction/Installation Manual