You're shopping
Eugene, OR
7 AM - 8 PM
Jerry’s Home Improvement Center
Titebond 6222
Titebond instant bond is a two-part bonding system that takes between 5 to 15 sec to set and 30 to 60 sec for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Titebond instant bond thick viscosity product offers an assembly time of 10 sec and an initial cure speed of 8 sec. It is ideal for bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use.
| Form | : | Liquid |
| Color | : | Clear |
| Odor/Scent | : | Acute, Irritant |
| Net Content | : | 4 oz |
| Container Type | : | Bottle |
| Compositions | : | Ethyl 2-Cyanoacrylate |
| Specific Gravity | : | 1.1 |
| Boiling Point | : | >212 deg F |
| Flash Point | : | 180.5 deg F |
| VOC Content | : | 20 g/L |
| Viscosity | : | 2400 cPs |
| Curing Time | : | 8 hr |
| Temperature Rating | : | -65 to 200 deg F |
| Resists | : | Heat, Impact, Solvents |
| Applicable Materials | : | Acrylic, Granite, MDF, Natural Rubber, PVC, Wood |
- Fast set, eliminates clamping or reduces clamp time
- Bonds stronger than wood
- Excellent heat and solvent resistance
- Unaffected by finishes
- Triple distilled for purity and consistency
- Impact-resistant
- No-clog applicator for easy use and waste reduction
- Ideal for bonding miter joints on MDF and porous woods
- Designed for finish and trim carpentry
- High viscosity allows time for positioning parts
SDS